• 

  Independant_84

  9 years ago

  Looks the same as my evo softail neck 82mm from the bottom to the top of the section where the speedo cables goes through if that helps any.

• 

  carbon fibre

  9 years ago

  i admire what you are doing champ
  If ya want some great internet help, try the "Jockey Journal Board" or "Panhead and Flathead" websites.
  jockeyjournal.com
  hydra-glide.com

• 

  kickinon

  9 years ago

  it is better if you measure between tank mounts , as the measurment from the centre of speedometer cable hole is not as important..
  put the correct diameter dowel or pipe in the speedo hole as pictured& drop the dash casting over it, measure your tank mount points(on the tanks you are going to use)
  front to rear that will tell you where to weld the rear mount,and dont worry to much about the height of the cast dash mount as the speedometer & ignition switch can be shimmed to the correct height to mount the dash cover corrctly....

  
  

  

• 

  Baloffski

  5 years ago

  Now .That is so cool France. Thank you for share with other motorcycle people.........

• 

  Krash Kinkade

  5 years ago

  Panhead51 good to see your still at it.

  after you used the brace to hold flywheels, did you check turning the flywheels with a dial gauge on each side where crank rides in its case bearings to see if its true?

  they use that tool but they also use a mallet & a tappered head ( like a chisel . to get them close to perfect true as they can. I like the old 74 cubic inch the heavy flywheels & shorter stroke they felt nicer to ride than the latter 80 cubic inch ( not faster just they pulled low rev's better ) keep at it, Panheads are the best looking HD motor!!

• 

  Wideglider

  5 years ago

  You're doing very well with English from what I see, dare I say - better than many people that were born here!

  Good luck with your build - it is great to learn something everyday as you say, most importantly enjoy.

• 

  Baloffski

  4 years ago

  Hey France, 

  keep it going man, will be so good to complete and to have done such a great project from the beginning to the ending.

  These days in Australia you do not see that many Panheads around on the road.
  

• 

  ralphski

  4 years ago

  sad times mate, but never say never.

  you gave it a fair go

  all the best, vive la yellow vests

• 

  Krash Kinkade

  4 years ago

  well I've been lucky enough to have ridden a number of different Panheads & fortunate enough to have learnt how to kick start them ( a lot different to kick starting a Shovel )

  but I've missed the boat owning one, as I knew I would not be the best owner, as like riding hard & far. the Pan's will do both just need to keep eye on everything as you travel.

• 

  steelo

  4 years ago

  Happy to keep you on board. In case you come back to the fold with another bike. We don't have too many established OS members (who don't want to spam us)

  If you are determined to delete everything, you can do so via your account
  

• 

  paulybronco

  4 years ago

  Quoting steelo on 03 Feb 2020 05:03 AM

  Happy to keep you on board. In case you come back to the fold with another bike. We don't have too many established OS members (who don't want to spam us)

  If you are determined to delete everything, you can do so via your account
  

  Hey i live in another country and your not that nice to me.....

• 

  steelo

  4 years ago

  That's not true PB. I've always got your back!!
  
  

  

• 

  paulybronco

  4 years ago

  Quoting steelo on 03 Feb 2020 05:30 AM

  That's not true PB. I've always got your back!!
  
  

  

  Hey i call discrimination.......we don't speak the Queen's English as our first language.

• 

  steelo

  3 years ago

  No time limit on these things. Nor is a necessity to comment. Ask the forum for help.
  

  PhoenixHD likes this post

• 

  Krash Kinkade

  3 years ago

  Welcome back!!

  Please don't give up!!

  No matter what I wrote in other post to you, Riding & Owning a Panhead is worth waiting for no matter how long it takes!!

  You can ride them forever if you want to & in my eyes the most beautiful Harley Motor ever produced!!

  Good things take time & are worth waiting for!!

  PhoenixHD likes this post

• 

  Far Canal

  3 years ago

  NO

  rick k likes this post

• 

  steelo

  3 years ago

  Gee you’re a hard marker fc!  I’m just sorry I didn’t think of having a range of t shirts or a go fund me page to upgrade the ultra. 

  Gotta give him credit for trying. What size do you take. 

  rick k likes this post

• 

  paulybronco

  3 years ago

  Quoting steelo on 07 Jan 2021 10:47 AM

  Gee you’re a hard marker fc!  I’m just sorry I didn’t think of having a range of t shirts or a go fund me page to upgrade the ultra. 

  Gotta give him credit for trying. What size do you take. 

  We were hoping that as the richest man on the forum you would buy us all a shirt Steelo....a XL for me please
  

• 

  dicko

  3 years ago

  FACON ELL!@#$#

• 

  bloodog

  3 years ago

  I was hoping to buy a Aston Martion, I seen one in the Dubai airport when passing through from Europe.

  Did not really like the brand until I seen the price