Who's online: gidgi, Hilly, John.R, Ynotc, Oz Dan, hipman, Glenn W, JamesJ, berserker, Guests: 185
16/16
  • Krash Kinkade Posts: 2226
    Motor Head Krash Kinkade
    05 Nov 2018 07:11 AM
    Quoting Hilly on 04 Nov 2018 02:47 PM
    Got sick of dragging that 2 into 1 around corners and came to the conclusion I don't like the look of it anyway, might come back to trying to upsweep the muffler down the track but chucked the breakout system back on with Rush slip ons, well I was a bit taken aback at how friggin touchy it was throttle wise and it seemed like it wanted to stall taking off.
    So put the throttle table back to stock and put the idle back to what I had it before and it's all good again, bit louder that the trapped Rush but I like it more.
    HD Forums Australia - slim_3.jpg

    Classic Hilly!!
    I like duel's!!, bike look's great!
    just those tyre look a bit grey , so go down the store buy a tin of kiwi parade wax black boot polish & two brush's. jack wheel up one at a time , so u can spin them, you just put enough polish on tyre wall, then buff it with the the other brush. comes up glossy black like the rest of the bike, & best thing is don't effect tyre grip.
  • tussuck Posts: 1463
    Melbourne
    Performance Poster tussuck
    05 Nov 2018 12:47 PM
    22 DISKS is a chitload of disks to have on a supertrapp.  I run 10 + an open end cap which is about another 10 and thats loud.
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 06:20 PM
    Quoting Hilly on 04 Nov 2018 02:47 PM
    Got sick of dragging that 2 into 1 around corners and came to the conclusion I don't like the look of it anyway, might come back to trying to upsweep the muffler down the track but chucked the breakout system back on with Rush slip ons, well I was a bit taken aback at how friggin touchy it was throttle wise and it seemed like it wanted to stall taking off.
    So put the throttle table back to stock and put the idle back to what I had it before and it's all good again, bit louder that the trapped Rush but I like it more.
    HD Forums Australia - slim_3.jpg

    Quoting perthhog on 04 Nov 2018 10:00 PM
    No what you mean about exhaust noise  I run a two into 1 with suprtrap on one
    Of my evo softails as I wanted a different look when I built it  which I still 
    Like but yep  to quiet  even with a open end I think I have 22 discs but 
    Recently brought  some new old stock black Mac  in black  pipes of flebay  so may 
    Swap them out soon 
    Cool, stick up a pic if you do, like to how it looks.
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 06:20 PM
    Quoting Hilly on 04 Nov 2018 02:47 PM
    Got sick of dragging that 2 into 1 around corners and came to the conclusion I don't like the look of it anyway, might come back to trying to upsweep the muffler down the track but chucked the breakout system back on with Rush slip ons, well I was a bit taken aback at how friggin touchy it was throttle wise and it seemed like it wanted to stall taking off.
    So put the throttle table back to stock and put the idle back to what I had it before and it's all good again, bit louder that the trapped Rush but I like it more.
    HD Forums Australia - slim_3.jpg

    Quoting Krash Kinkade on 05 Nov 2018 07:11 AM
    Classic Hilly!!
    I like duel's!!, bike look's great!
    just those tyre look a bit grey , so go down the store buy a tin of kiwi parade wax black boot polish & two brush's. jack wheel up one at a time , so u can spin them, you just put enough polish on tyre wall, then buff it with the the other brush. comes up glossy black like the rest of the bike, & best thing is don't effect tyre grip.
    Thanks Krash, good old nugget aye :)
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 06:24 PM
    Got the heritage rear header and balance pipe on this arvo, looks the goods I reckon, rather biased and self serving perhaps but I like the result :)

    HD Forums Australia - IMG_20181105_171032.jpg
    The difference between the two from the rear...HD Forums Australia - IMG_20181104_140604_1.jpg
    Breakout setup above and heritage below

    HD Forums Australia - IMG_20181105_170844.jpg

  • Iron Posts: 248
    Gods Country- Adelaide
    Stock Poster Iron
    05 Nov 2018 06:43 PM
    very nice indeed looks great well done mate. Will the heritage headers front and back bolt straight on to our bikes ? I like the look of yours.
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 07:13 PM
    Yes mate they will, if you can find a set off a 2017 model you will be better off as they don't have the exhaust butterfly in the rear pipe, 2016 down does, you can wedge them open but for me I rather they not be there.
  • 98fxstc Posts: 258
    Blackmans Bay,Tasmania
    Stage 1 Poster 98fxstc
    05 Nov 2018 07:29 PM
    Looks a bit neater tucked in there Hilly
    (and not as likely to scrape ?)

    Did you tidy up the shelves before you took the pic ? or you are always tidy ?
  • fatbat Posts: 2677
    Forum Legend fatbat
    05 Nov 2018 07:35 PM
    Heritage exhaust looks better. What mufflers are on it?

    And his shed looks neater without the Collingwood flag 
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 08:51 PM
    Quoting 98fxstc on 05 Nov 2018 07:29 PM
    Looks a bit neater tucked in there Hilly
    (and not as likely to scrape ?)

    Did you tidy up the shelves before you took the pic ? or you are always tidy ?
    Footpeg will be the first thing down now :) it sits a little higher as well as being tucked in further so it should be good, shelves, well no I didn't but I do need to do a ruthless cleanout.....
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 08:55 PM
    Quoting fatbat on 05 Nov 2018 07:35 PM
    Heritage exhaust looks better. What mufflers are on it?

    And his shed looks neater without the Collingwood flag 
    Thanks mate, Rush slip ons, they were the slash cut type but I put the drop saw across the end as I like the squared off look, 1.75" baffles, were supposed to be 2" so have to round some up, part number needed is 142012 if you got any :)
    Pie's flag is in the bar cobber.
  • FLHuTChU Posts: 3186
    Newcastle NSW
    Forum Legend FLHuTChU
    05 Nov 2018 09:04 PM
    Neat job Hilly.
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    05 Nov 2018 09:33 PM
    Quoting FLHuTChU on 05 Nov 2018 09:04 PM
    Neat job Hilly.
    Thanks Hutch
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    06 Nov 2018 04:13 PM
    Got a ride in this arvo, tis a lovely thing now, chuck it into corners and roundabouts with reckless abandon, first thing down is the heel of me boot.
    So you twin cam FL owners if you want to make them handle and have reasonable lean angles here is one recipe that works.
    2" over front fork tubes.
    Progressive strut inserts.
    Fournales Pan Cruise rear shocks set up for your weight.
    Forward controls, 3" extended.
    Heritage exhaust set up.
    On the noise front the cut down torque cones have made it a little quieter putting around town and at steady cruise, whack the throttle and you wouldn't know they are there, wicked as.
    HD Forums Australia - IMG_20181106_144531.jpg

  • gidgi Posts: 676
    NSW
    Performance Poster gidgi
    06 Nov 2018 04:42 PM
    Quoting Hilly on 06 Nov 2018 04:13 PM
    Got a ride in this arvo, tis a lovely thing now, chuck it into corners and roundabouts with reckless abandon, first thing down is the heel of me boot.
    So you twin cam FL owners if you want to make them handle and have reasonable lean angles here is one recipe that works.
    2" over front fork tubes.
    Progressive strut inserts.
    Fournales Pan Cruise rear shocks set up for your weight.
    Forward controls, 3" extended.
    Heritage exhaust set up.
    On the noise front the cut down torque cones have made it a little quieter putting around town and at steady cruise, whack the throttle and you wouldn't know they are there, wicked as.
    HD Forums Australia - IMG_20181106_144531.jpg

    Wicked mate looks awesome & its the right color 
  • JamesJ Posts: 377
    Stage 1 Poster JamesJ
    06 Nov 2018 05:05 PM
    Quoting Hilly on 06 Nov 2018 04:13 PM
    Got a ride in this arvo, tis a lovely thing now, chuck it into corners and roundabouts with reckless abandon, first thing down is the heel of me boot.
    So you twin cam FL owners if you want to make them handle and have reasonable lean angles here is one recipe that works.
    2" over front fork tubes.
    Progressive strut inserts.
    Fournales Pan Cruise rear shocks set up for your weight.
    Forward controls, 3" extended.
    Heritage exhaust set up.
    On the noise front the cut down torque cones have made it a little quieter putting around town and at steady cruise, whack the throttle and you wouldn't know they are there, wicked as.
    HD Forums Australia - IMG_20181106_144531.jpg

    Quoting gidgi on 06 Nov 2018 04:42 PM
    Wicked mate looks awesome & its the right color 
    +1
  • Hilly Posts: 2342
    Townsville
    Motor Head Hilly
    06 Nov 2018 05:09 PM
    Thanks gidgi, pretty bloody happy with it now, even if the 110 engine shits itself down the track I'll be hanging onto it, S&S 124 crate engine and just keep riding.
  • Iron Posts: 248
    Gods Country- Adelaide
    Stock Poster Iron
    06 Nov 2018 07:46 PM
    Where's that like button gone  


    HD Forums Australia - like-button.jpg

  • ddreed Posts: 31
    Melbourne
    Stock Poster ddreed
    07 Nov 2018 07:37 AM
    Quoting Hilly on 06 Nov 2018 04:13 PM
    Got a ride in this arvo, tis a lovely thing now, chuck it into corners and roundabouts with reckless abandon, first thing down is the heel of me boot.
    So you twin cam FL owners if you want to make them handle and have reasonable lean angles here is one recipe that works.
    2" over front fork tubes.
    Progressive strut inserts.
    Fournales Pan Cruise rear shocks set up for your weight.
    Forward controls, 3" extended.
    Heritage exhaust set up.
    On the noise front the cut down torque cones have made it a little quieter putting around town and at steady cruise, whack the throttle and you wouldn't know they are there, wicked as.
    HD Forums Australia - IMG_20181106_144531.jpg

    Nice Hilly. Thanks for sharing the "recipe". I just need the ingredients ($)...
16/16
© 2018 - 1.0.4.2