Hey fella's..Can anyone tell me what number or colour loctite to use on rear wheel pulley and disk ...

I use red on Pulley bolts, blue on rotor bolts

When it absolutely has to hold, I use PK blue. Plus you can always store spare used gum under the seat

Don"t listen to advice give, PK Yellow Wrigley"s anyday.

Locktite 271 for the pulley ,two drops and 55-65ftlb , Locktite 243 on rotor screws  and 30-45ftlb ,rotor screw to be replaced after three torque cycles .Check that these specifications are applicable to your model.
Do not go by Loctite colors as there are a number of grades that use the same colour but have different applications and retention qualities.

They may have expired!

Yes Hilly ,year and model is specific for fastener specifications , i just grabbed a early 2000's ,manual for reference only .
Your collection of products will cover a lot of applications for vehicle service.Mine is tragic,but necessary  [not all are in photo] you have already seen the tension wrench set.
What i said about color not being a reference is more than represented in my set ,there are five greens ,three reds , three blues , one purple ,one yellow,one white.

Cheers,