HD Forums Australia
Home
Topics

Mainshaft Bearing Removal

  • rodrocket
    rodrocket
    5 years ago
    Greetings all 

    Does anyone here in Melbourne have the tool for removal & replacement of the outer mainshaft bearing that we can borrow or hire 

    need to replace the bearing on a 2006 FXD 88Ci


  • robots
    robots
    5 years ago
    which tool is that rodrocket

  • rodrocket
    rodrocket
    5 years ago
    MAINSHAFT BEARING INNER RACE 
    PART NUMBER TOOL NAME 
    MAINSHAFT BEARING INNER RACE 
    REMOVER/INSTALLER 
    HD-34902-C 
    Removal 
    NOTE 
    Bearing outer race installation requires properly aligned bearing 
    inner race. Use the recommended tool MAINSHAFT BEARING 
    INNER RACE REMOVER/INSTALLER (Part No. HD-34902- 
    C). 
    1. See Figure 5-22. Install end cap (2) into end of mainshaft. 
    2. Position puller (3) around mainshaft, under bearing inner 
    race. 
    3. Turn forcing screw (4) clockwise while holding puller to 
    remove bearing. 
    4 
    3 
    2 1 
    sm05961 
    1. Bearing inner race 
    2. End cap 
    3. Puller 
    4. Forcing screw 
    Figure 5-22. Pulling Mainshaft Inner Bearing Race 

    Above is from my breakout service manual 

    just googled the tool part number and came up with this kit 


    My son threw the belt on his bike and now he has it in bits he noticed the outer bearing is trashed....
    s-l1600.jpg
  • robots
    robots
    5 years ago
    Okay good
  • robots
    robots
    5 years ago
    Will check mine. . I have heartland one. Will check what years it works for rodrocket
    What area of Melbourne 
  • rodrocket
    rodrocket
    5 years ago
    Thanks for that

    I am in Airport West, my son is in Craigieburn 
  • robots
    robots
    5 years ago
    i have it, send me a message with your phone no.
    you wanting to remove the race?
Topics