Home

Online: baldy1450, Hilly

My FXST plans

My FXST plans

taztiger4
3 years ago

Quoting Mr.Mow on 09 May 2020 01:30 AM
With a bunch of swearing, drilling and general shoddy workmanship.. it appears a dyna sissy bar will fit.

Where did you get the sissy bar from please Mr Mow

Mr.Mow
3 years ago

Quoting Mr.Mow on 09 May 2020 01:30 AM
With a bunch of swearing, drilling and general shoddy workmanship.. it appears a dyna sissy bar will fit.

Quoting taztiger4 on 09 May 2020 01:53 AM
Where did you get the sissy bar from please Mr Mow

That one is from Slims fab farm in the US, it’s super super solid.
All I needed to do was drill two holes in it to line up with the middle fender trim bolts, had to gently bend it in a bit (softail fender is narrower than a dyna).
It’s only on temporarily as I’ll be getting someone local to make me something squarer, this ones pointy

taztiger4
3 years ago

Quoting Mr.Mow on 09 May 2020 01:30 AM
With a bunch of swearing, drilling and general shoddy workmanship.. it appears a dyna sissy bar will fit.

Quoting taztiger4 on 09 May 2020 01:53 AM
Where did you get the sissy bar from please Mr Mow

Quoting Mr.Mow on 09 May 2020 02:50 AM
That one is from Slims fab farm in the US, it’s super super solid.
All I needed to do was drill two holes in it to line up with the middle fender trim bolts, had to gently bend it in a bit (softail fender is narrower than a dyna).
It’s only on temporarily as I’ll be getting someone local to make me something squarer, this ones pointy

might be interested in buying it if you want to get rid of it
cheers

brucefxdl
3 years ago

Quoting Mr.Mow on 09 May 2020 01:30 AM
With a bunch of swearing, drilling and general shoddy workmanship.. it appears a dyna sissy bar will fit.

sissy bar looks the goods .

Birtyyy
3 years ago

Love where this is headed. My next project will be going very similar direction...

Far Canal
3 years ago

Hi Mow, who makes and sells those exhausts ?.
You mentioned in an earlier post that you chopped them. Were they originally longer?
Cheers

Mr.Mow
3 years ago

Quoting Far Canal on 11 May 2020 07:28 AM
Hi Mow, who makes and sells those exhausts ?.
You mentioned in an earlier post that you chopped them. Were they originally longer?
Cheers

They were ‘custom chrome’ old stock I got from eBay, old stock from 1994 (was wrapped in news paper), they flared out to megaphones, we hacked off the megaphones and put some generic 1 3/4” cocktail shaker mufflers, I chose one angled and one straight, but I can add an angled one down low or even go for two straight ‘cigars’. The exhaust was $150 or so plus shipping, mufflers were $90 each, very cheap system!
This was them originally

Far Canal
3 years ago

Well done, they look great after surgery.

About |
Privacy Policy |
Terms of Use
© 2024, v3.1.0