HD Forums Australia
Home
Topics

Polyurethane Handlebar Riser Bushings - 56298-03A

  • Hog1
    Hog1
    3 years ago
    Hi
    Fitting a new set of Factory47 bars on my SGS "18".
    Having it all apart I thought to also up grading the Riser Bushings..
    But little confused purchased HD kit..when I compare them with the stock ones.
    Doesn't look right new kit bolt isnt long enough.
    Am I supposed to cut down the actual bushing to make it fit?
    You would thing it should bolt straight on.
    Any help and input would be much appreciated......

    Cheers


    20200919_121312.jpg
    20200919_121457.jpg
  • DocGreen
    DocGreen
    3 years ago
    Hog1, are all 4 halves of the bushing the same length? It's possible you were given the wrong bolts in the kit mate, had a look around but couldn't confirm what length the new bolts should be. I left my originals when I swapped out the bars on my 17 SGS to 12" WildI's.
    I wouldn't cut the bushes, reuse your originals if keen to get the bike back on the road and see your dealer about the incorrect bolt length.
    Good luck

    DocGreen
  • Hog1
    Hog1
    3 years ago
    Hey DocGreen
    Yes champ all 4 are identical in size.
    No issue for bike to be back on the road..I would rather get it all 100% with the risers.
    These are 12" aswell Assult i think there called..
    Have another set  on order should get them during the week to see if it was an error with packaging the parts..
    Cheers

  • tussuck
    tussuck
    3 years ago
    In the meantime google that kit part number as the description should have the bolt lengths and/or harley part number in there.  
Topics